SystemWithStandardBodiesFor comparison purposes, an equivalent model with Bodies instead of PointMasses |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
In order to compare the results of the "PointMass" example where 6 point masses are rigidly connected together, in this comparison model, an equivalent system is setup, with the only difference that the point masses are replaced by Bodies with zero inertia.
Components (12)
 |
pointMass1 |
Type: PointMass |
|---|---|---|
|
pointMass2 |
Type: PointMass |
|
pointMass3 |
Type: PointMass |
|
pointMass4 |
Type: PointMass |
|
pointMass5 |
Type: PointMass |
|
pointMass6 |
Type: PointMass |
 |
fixedTranslation |
Type: FixedTranslation |
|
fixedTranslation1 |
Type: FixedTranslation |
|
fixedTranslation2 |
Type: FixedTranslation |
|
fixedTranslation3 |
Type: FixedTranslation |
|
fixedTranslation4 |
Type: FixedTranslation |
|
fixedTranslation5 |
Type: FixedTranslation |
Used in Examples (1)
 |
Modelica.Mechanics.MultiBody.Examples.Elementary Rigidly connected point masses in a point gravity field |