PathToAxisControlBusMap path planning to one axis control bus |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This model stores the 4 reference variables q, qd, qdd, moving from the path planning on the axis control bus.
Parameters (2)
| nAxis |
Value: 6 Type: Integer Description: Number of driven axis |
|---|---|
| axisUsed |
Value: 1 Type: Integer Description: Map path planning of axisUsed to axisControlBus |
Connectors (5)
 |
q |
Type: RealInput[nAxis] |
|---|---|---|
|
qd |
Type: RealInput[nAxis] |
|
qdd |
Type: RealInput[nAxis] |
 |
axisControlBus |
Type: AxisControlBus |
 |
moving |
Type: BooleanInput[nAxis] |
Components (4)
 |
q_axisUsed |
Type: RealPassThrough |
|---|---|---|
|
qd_axisUsed |
Type: RealPassThrough |
|
qdd_axisUsed |
Type: RealPassThrough |
 |
motion_ref_axisUsed |
Type: BooleanPassThrough |
Used in Components (2)
 |
Modelica.Mechanics.MultiBody.Examples.Systems.RobotR3.Components Generate reference angles for fastest kinematic movement |
 |
Modelica.Mechanics.MultiBody.Examples.Systems.RobotR3.Components Generate reference angles for fastest kinematic movement |