Fixed

Flange fixed in housing at a given angle

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

The flange of a 1D rotational mechanical system is fixed at an angle phi0 in the housing. May be used:

to connect a compliant element, such as a spring or a damper, between an inertia or gearbox component and the housing.
to fix a rigid element, such as an inertia, with a specific angle to the housing.

Parameters (1)

phi0	Value: 0 Type: Angle (rad) Description: Fixed offset angle of housing

Connectors (1)

	flange	Type: Flange_b Description: (right) flange fixed in housing

flange

Type: Flange_b

Description: (right) flange fixed in housing

Used in Examples (9)

	First Modelica.Mechanics.Rotational.Examples First example: simple drive train
	FirstGrounded Modelica.Mechanics.Rotational.Examples First example: simple drive train with grounded elements
	Friction Modelica.Mechanics.Rotational.Examples Drive train with clutch and brake
	CoupledClutches Modelica.Mechanics.Rotational.Examples Drive train with 3 dynamically coupled clutches
	LossyGearDemo1 Modelica.Mechanics.Rotational.Examples Example to show that gear efficiency may lead to stuck motion
	LossyGearDemo2 Modelica.Mechanics.Rotational.Examples Example to show combination of LossyGear and BearingFriction
	ElasticBearing Modelica.Mechanics.Rotational.Examples Example to show possible usage of support flange
	Backlash Modelica.Mechanics.Rotational.Examples Example to demonstrate backlash
	HeatLosses Modelica.Mechanics.Rotational.Examples Demonstrate the modeling of heat losses

Used in Components (13)

	EMF Modelica.Electrical.Analog.Basic Electromotoric force (electric/mechanic transformer)
	MechanicalPowerSensor Modelica.Electrical.Machines.Sensors Mechanical power = torque x speed
	RotorDisplacementAngle Modelica.Electrical.Machines.Sensors Rotor lagging angle
	PartialBasicMachine Modelica.Electrical.Machines.Interfaces Partial model for all machines
	PartialBasicInductionMachine Modelica.Magnetic.FundamentalWave.Interfaces Partial model for induction machine
	PartialBasicMachine Modelica.Magnetic.QuasiStatic.FundamentalWave.BasicMachines.BaseClasses Partial model for quasi static multi phase machines
	RotorDisplacementAngle Modelica.Magnetic.QuasiStatic.FundamentalWave.Sensors Rotor lagging angle
	Revolute Modelica.Mechanics.MultiBody.Joints Revolute joint (1 rotational degree-of-freedom, 2 potential states, optional axis flange)
	PartialOneFlangeAndSupport Modelica.Mechanics.Rotational.Interfaces Partial model for a component with one rotational 1-dim. shaft flange and a support used for graphical modeling, i.e., the model is build up by drag-and-drop from elementary components
	PartialTwoFlangesAndSupport Modelica.Mechanics.Rotational.Interfaces Partial model for a component with two rotational 1-dim. shaft flanges and a support used for graphical modeling, i.e., the model is build up by drag-and-drop from elementary components
	PartialElementaryOneFlangeAndSupport Modelica.Mechanics.Rotational.Interfaces Obsolete partial model. Use PartialElementaryOneFlangeAndSupport2.
	PartialElementaryTwoFlangesAndSupport Modelica.Mechanics.Rotational.Interfaces Obsolete partial model. Use PartialElementaryTwoFlangesAndSupport2.
	PartialElementaryRotationalToTranslational Modelica.Mechanics.Rotational.Interfaces Partial model to transform rotational into translational motion