PartialControlledDCPMPartial controlled DC PM drive with H-bridge from battery |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This is a partial model of a controlled DC PM drive.
Electrical power is taken from a battery (constant voltage with inner resistance) and fed to the motor via a DC-DC inverter. The level of detail of the DC-DC inverter may be chosen from ideal averaging or switching. The DC-DC inverter is commanded by the current controller. The current controller is parameterized according to the absolute optimum.
Further reading: Tutorial at the Modelica Conference 2017
Parameters (1)
| driveData |
Value: Type: DriveDataDCPM Description: DC machine data |
|---|
Components (8)
 |
driveData |
Type: DriveDataDCPM Description: DC machine data |
|---|---|---|
 |
loadInertia |
Type: Inertia |
 |
speedSensor |
Type: SpeedSensor |
 |
dcpm |
Type: DC_PermanentMagnet |
 |
armatureInverter |
Type: DcdcInverter |
 |
source |
Type: Battery |
 |
currentController |
Type: LimitedPI |
 |
tau2i |
Type: Gain |
Extended by (3)
 |
Modelica.Electrical.Machines.Examples.ControlledDCDrives Position controlled DC PM drive with H-bridge from battery |
 |
Modelica.Electrical.Machines.Examples.ControlledDCDrives Speed controlled DC PM drive with H-bridge from battery |
 |
Modelica.Electrical.Machines.Examples.ControlledDCDrives Current controlled DC PM drive with H-bridge from battery |