SoftStarterSoft start of an induction machine |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This model demonstrates a soft start of an induction machine: Voltage ramp is started at 0.1 s and should ramp up to nominal voltage within 4s, but current is limited to 2.5 times nominal current. At 5.5 s a voltage ramp down within 3 s is required.
Reference voltage is controlled by the softStartControl block, reference voltage is converted to firing angle by the voltageToAngle block. Firing angle is processed by the Signal2mPulse adaptor to firing signals which are applied to the triac.
Compare starting with firing angle by starting direct on line, star-delta starting, and starting via a transformer.
VNominal |
Value: 100 Type: Voltage (V) Description: Nominal RMS voltage line to line |
---|---|
INominal |
Value: 100 * y2d Type: Current (A) Description: Nominal RMS current at the terminals |
fNominal |
Value: aimcData.fsNominal Type: Frequency (Hz) Description: Nominal frequency |
JLoad |
Value: aimcData.Jr Type: Inertia (kg·m²) Description: Load's moment of inertia |
TLoad |
Value: 161.4 Type: Torque (N·m) Description: Nominal load torque |
wLoad |
Value: 1440.45 * 2 * Modelica.Constants.pi / 60 Type: AngularVelocity (rad/s) Description: Nominal load speed |
aimcData |
Value: Type: IM_SquirrelCageData |
sineVoltage |
Type: SineVoltage |
|
---|---|---|
star |
Type: Star |
|
ground |
Type: Ground |
|
currentQuasiRMSSensor |
Type: CurrentQuasiRMSSensor |
|
triac |
Type: PolyphaseTriac |
|
voltageSensor |
Type: VoltageSensor |
|
star1 |
Type: Star |
|
ground1 |
Type: Ground |
|
adaptor |
Type: Signal2mPulse |
|
voltageToAngle |
Type: VoltageToAngle |
|
multiSensor |
Type: MultiSensor |
|
star2 |
Type: Star |
|
ground2 |
Type: Ground |
|
rootMeanSquare |
Type: RootMeanSquare |
|
harmonic |
Type: Harmonic |
|
terminalBox |
Type: MultiTerminalBox |
|
imc |
Type: IM_SquirrelCage |
|
aimcData |
Type: IM_SquirrelCageData |
|
loadInertia |
Type: Inertia |
|
quadraticLoadTorque | ||
softStartControl |
Type: SoftStartControl |
|
filter |
Type: Filter |
|
booleanTable |
Type: BooleanTable |