Torque2

Input signal acting as torque on two flanges

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

The input signal tau defines an external torque in [Nm] which acts at both flange connectors, i.e., the components connected to these flanges are driven by torque tau.

The input signal can be provided from one of the signal generator blocks of Modelica.Blocks.Sources.

Connectors (3)

flange_a

Type: Flange_a

Description: Flange of left shaft
flange_b

Type: Flange_b

Description: Flange of right shaft
tau

Type: RealInput

Description: Torque driving the two flanges (a positive value accelerates the flange)

Used in Examples (1)

RollingWheelSetDriving

Modelica.Mechanics.MultiBody.Examples.Elementary

Rolling wheel set that is driven by torques driving the wheels