IndirectCoolingIndirect cooling circuit |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
3rd test example: IndirectCooling
A prescribed heat sources dissipates its heat through a thermal conductor to the inner coolant cycle. It is necessary to define the pressure level of the inner coolant cycle. The inner coolant cycle is coupled to the outer coolant flow through a thermal conductor.Inner coolant's temperature rise near the source is the same as temperature drop near the cooler.
Results:
| output | explanation | formula | actual steady-state value |
| dTSource | Source over Ambient | dtouterCoolant + dtCooler + dTinnerCoolant + dtToPipe | 40 K |
| dTtoPipe | Source over inner Coolant | Losses / ThermalConductor.G | 10 K |
| dTinnerColant | inner Coolant's temperature increase | Losses * cp * innerMassFlow | 10 K |
| dTCooler | Cooler's temperature rise between inner and outer pipes | Losses * (innerGc + outerGc) | 10 K |
| dTouterColant | outer Coolant's temperature increase | Losses * cp * outerMassFlow | 10 K |
Parameters (3)
| outerMedium |
Value: FluidHeatFlow.Media.Medium() Type: Medium Description: Outer medium |
|---|---|
| innerMedium |
Value: FluidHeatFlow.Media.Medium() Type: Medium Description: Inner medium |
| TAmb |
Value: 293.15 Type: Temperature (K) Description: Ambient temperature |
Outputs (5)
| dTSource |
Default Value: prescribedHeatFlow.port.T - TAmb Type: TemperatureDifference (K) Description: Source over Ambient |
|---|---|
| dTtoPipe |
Default Value: prescribedHeatFlow.port.T - pipe1.T_q Type: TemperatureDifference (K) Description: Source over inner Coolant |
| dTinnerCoolant |
Default Value: pipe1.dT Type: TemperatureDifference (K) Description: Inner Coolant's temperature increase |
| dTCooler |
Default Value: innerPipe.T_q - outerPipe.T_q Type: TemperatureDifference (K) Description: Cooler's temperature increase between inner and outer pipes |
| dTouterCoolant |
Default Value: outerPipe.dT Type: TemperatureDifference (K) Description: Outer coolant's temperature increase |
Components (20)
 |
outerMedium |
Type: Medium Description: Outer medium |
|---|---|---|
|
innerMedium |
Type: Medium Description: Inner medium |
 |
ambient1 |
Type: Ambient |
 |
outerPump |
Type: VolumeFlow |
|
ambient2 |
Type: Ambient |
 |
thermalConductor |
Type: ThermalConductor |
 |
heatCapacitor |
Type: HeatCapacitor |
 |
prescribedHeatFlow |
Type: PrescribedHeatFlow |
 |
pipe1 |
Type: Pipe |
 |
absolutePressure |
Type: AbsolutePressure |
|
innerPump |
Type: VolumeFlow |
 |
heatFlow |
Type: Constant |
|
outerVolumeFlow |
Type: Constant |
|
innerVolumeFlow |
Type: Constant |
|
outerGc |
Type: Constant |
|
innerGc |
Type: Constant |
|
outerPipe |
Type: Pipe |
|
innerPipe |
Type: Pipe |
 |
innerConvection |
Type: Convection |
|
outerConvection |
Type: Convection |