This information is part of the Modelica Standard Library maintained by the Modelica Association.

Two tanks are connected with a pipe:

• Tank 1: initial level = 0.9 m, T = 40°C
• Tank 2: initial level = 0.1 m, T = 20°C

Within 1.5 s (dependent on the flow resistance of the pipe) the level = 0.5 m in both tanks is the same, medium flows from tank 1 to tank 2. The temperature of tank 1 remains unchanged, the temperature of tank 2 is increased.

V_flow	Default Value: pipe.V_flow Type: VolumeFlowRate (m³/s) Description: Volume flow rate tank 1 -> tank 2
level1	Default Value: openTank1.level Type: Length (m) Description: Level in tank 1
T1	Default Value: openTank1.TTank Type: Temperature (K) Description: Temperature in tank 1
level2	Default Value: openTank2.level Type: Length (m) Description: Level in tank 2
T2	Default Value: openTank2.TTank Type: Temperature (K) Description: Temperature in tank 2