SignalSource

Base class for continuous signal source

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

Basic block for Real sources of package Blocks.Sources. This component has one continuous Real output signal y and two parameters (offset, startTime) to shift the generated signal.

Parameters (2)

offset

Value: 0

Type: Real

Description: Offset of output signal y

startTime

Value: 0

Type: Time (s)

Description: Output y = offset for time < startTime

Connectors (1)

y

Type: RealOutput

Description: Connector of Real output signal

Used in Components (2)

Modelica.Electrical.Analog.Interfaces

Interface for voltage sources

Modelica.Electrical.Analog.Interfaces

Interface for current sources

Extended by (11)

	TimeTable Modelica.Blocks.Sources Generate a (possibly discontinuous) signal by linear interpolation in a table
	Trapezoid Modelica.Blocks.Sources Generate trapezoidal signal of type Real
	SawTooth Modelica.Blocks.Sources Generate saw tooth signal
	Pulse Modelica.Blocks.Sources Generate pulse signal of type Real
	Exponentials Modelica.Blocks.Sources Generate a rising and falling exponential signal
	ExpSine Modelica.Blocks.Sources Generate exponentially damped sine signal
	Cosine Modelica.Blocks.Sources Generate cosine signal
	Sine Modelica.Blocks.Sources Generate sine signal
	Ramp Modelica.Blocks.Sources Generate ramp signal
	Step Modelica.Blocks.Sources Generate step signal of type Real
	Clock Modelica.Blocks.Sources Generate actual time signal