This information is part of the Modelica Standard Library maintained by the Modelica Association.

This example shows a full controlled 2*m pulse bridge rectifier with resistive load, where m is the number of phases. In case of resistive load the full controlled bridge shows the same output voltage as the half controlled bridge.

Plot current currentSensor.i, average current meanCurrent.y, voltage voltageSensor.v and average voltage meanVoltage.v.

Vrms	Value: 110 Type: Voltage (V) Description: RMS supply voltage
f	Value: 50 Type: Frequency (Hz) Description: Frequency
constantFiringAngle	Value: 30 * pi / 180 Type: Angle (rad) Description: Firing angle
R	Value: 20 Type: Resistance (Ω) Description: Load resistance