CylinderCylinder with rod and crank of a combustion engine |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Cylinder with rod and crank of a combustion engine. Used as submodel in Loops.EngineV6.
Parameters (10)
| animation |
Value: true Type: Boolean Description: = true, if animation shall be enabled |
|---|---|
| cylinderTopPosition |
Value: 0.42 Type: Length (m) Description: Length from crank shaft to end of cylinder. |
| pistonLength |
Value: 0.1 Type: Length (m) Description: Length of cylinder |
| rodLength |
Value: 0.2 Type: Length (m) Description: Length of rod |
| crankLength |
Value: 0.2 Type: Length (m) Description: Length of crank shaft in x direction |
| crankPinOffset |
Value: 0.1 Type: Length (m) Description: Offset of crank pin from center axis |
| crankPinLength |
Value: 0.1 Type: Length (m) Description: Offset of crank pin from center axis |
| cylinderInclination |
Value: 0 Type: Angle (rad) Description: Inclination of cylinder |
| crankAngleOffset |
Value: 0 Type: Angle (rad) Description: Offset for crank angle |
| cylinderLength |
Value: cylinderTopPosition - (pistonLength + rodLength - crankPinOffset) Type: Length (m) Description: Maximum length of cylinder volume |
Connectors (4)
Components (16)
 |
Piston |
Type: BodyCylinder |
|---|---|---|
 |
Rod |
Type: BodyBox |
 |
B2 |
Type: Revolute |
|
Crank4 |
Type: BodyBox |
|
Crank3 |
Type: BodyCylinder |
|
Crank1 |
Type: BodyCylinder |
|
Crank2 |
Type: BodyBox |
 |
B1 | |
 |
Mid |
Type: FixedTranslation |
 |
Cylinder |
Type: Prismatic |
|
Mounting |
Type: FixedTranslation |
 |
CylinderInclination |
Type: FixedRotation |
|
CrankAngle1 |
Type: FixedRotation |
|
CrankAngle2 |
Type: FixedRotation |
|
CylinderTop |
Type: FixedTranslation |
 |
gasForce |
Type: GasForce2 |
Used in Examples (1)
 |
Modelica.Mechanics.MultiBody.Examples.Loops V6 engine with 6 cylinders, 6 planar loops and 1 degree-of-freedom |