PartialCutForceBaseSensorBase class to measure cut force and/or torque between two frames, defined by equations (frame_resolve must be connected exactly once) |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This is a base class for 3-dim. mechanical components with two frames and one output port in order to measure the cut-force and/or cut-torque acting between the two frames and to provide the measured signals as output for further processing with the blocks of package Modelica.Blocks.
Parameters (1)
| resolveInFrame |
Value: Modelica.Mechanics.MultiBody.Types.ResolveInFrameA.frame_a Type: ResolveInFrameA Description: Frame in which output vector is resolved (world, frame_a, or frame_resolve) |
|---|
Connectors (3)
 |
frame_a |
Type: Frame_a Description: Coordinate system a |
|---|---|---|
 |
frame_b |
Type: Frame_b Description: Coordinate system b |
 |
frame_resolve |
Type: Frame_resolve Description: The output vector is optionally resolved in this frame (cut-force/-torque are set to zero) |
Components (1)
 |
world |
Type: World |
|---|
Extended by (2)
 |
Modelica.Mechanics.MultiBody.Sensors.Internal Basic sensor to measure cut torque vector (frame_resolve must be connected) |
 |
Modelica.Mechanics.MultiBody.Sensors.Internal Basic sensor to measure cut force vector (frame_resolve must be connected) |