Real	Quantity: Density Unit: kg/m3 Display Unit: g/cm3 Restricted Range: 0 to 1.e5 Nominal Value: 1

Used in Components (23)

	EquilibriumDrumBoiler Modelica.Fluid.Examples.DrumBoiler.BaseClasses Simple Evaporator with two states, see Astroem, Bell: Drum-boiler dynamics, Automatica 36, 2000, pp.363-378
	TankWith3InletOutletArraysWithEvaporatorCondensor Modelica.Fluid.Examples.AST_BatchPlant.BaseClasses Tank with Heating and Evaporation
	PartialLumpedVessel Modelica.Fluid.Vessels.BaseClasses Lumped volume with a vector of fluid ports and replaceable heat transfer model
	PartialStaggeredFlowModel Modelica.Fluid.Pipes.BaseClasses.FlowModels Base class for momentum balances in flow models
	PartialPipeFlowHeatTransfer Modelica.Fluid.Pipes.BaseClasses.HeatTransfer Base class for pipe heat transfer correlation in terms of Nusselt number heat transfer in a circular pipe for laminar and turbulent one-phase flow
	PartialPump Modelica.Fluid.Machines.BaseClasses Base model for centrifugal pumps
	PumpMonitoringNPSH Modelica.Fluid.Machines.BaseClasses.PumpMonitoring Monitor Net Positive Suction Head (NPSH)
	PartialValve Modelica.Fluid.Valves.BaseClasses Base model for valves
	VolumeFlowRate Modelica.Fluid.Fittings.GenericResistances Flow model for generic resistance parameterized with the volume flow rate
	SimpleGenericOrifice Modelica.Fluid.Fittings Simple generic orifice defined by pressure loss coefficient and diameter (only for flow from port_a to port_b)
	FixedBoundary Modelica.Fluid.Sources Boundary source component
	DensityTwoPort Modelica.Fluid.Sensors Ideal two port density sensor
	VolumeFlowRate Modelica.Fluid.Sensors Ideal sensor for volume flow rate
	PartialPressureLoss Modelica.Fluid.Interfaces Base flow model for pressure loss functions with the same area at port_a and at port_b
	PortVolume Modelica.Media.Examples.Utilities Fixed volume associated with a port by the finite volume method
	FixedAmbient Modelica.Media.Examples.Utilities Ambient pressure, temperature and mass fraction source
	PortVolume Modelica.Media.Examples.Tests.Components Fixed volume associated with a port by the finite volume method
	FixedAmbient Modelica.Media.Examples.Tests.Components Ambient pressure, temperature and mass fraction source
	BaseProperties Modelica.Media.Interfaces.PartialMedium Base properties (p, d, T, h, u, R, MM and, if applicable, X and Xi) of a medium
	FluidLimits Modelica.Media.Interfaces.Types Validity limits for fluid model
	ThermodynamicState Modelica.Media.Air.ReferenceAir.Air_Base Thermodynamic state
	ThermodynamicState Modelica.Media.R134a.R134a_ph Thermodynamic state
	ThermodynamicState Modelica.Media.Water.WaterIF97_base Thermodynamic state

Type Information

Used in Components (23)