StrengthOutput strengths of registers |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Strength Table:
Strength | Output conversion to |
'S_X01' | Forcing X, 0, 1 |
'S_X0H' | Forcing X, 0 and Weak 1 |
'S_XL1' | Forcing X, 1 and Weak 0 |
'S_X0Z' | Forcing X, 0 and High Impedance |
'S_XZ1' | Forcing X, 1 and High Impedance |
'S_WLH' | Weak X, 0, 1 |
'S_WLZ' | Weak X, 0 and High Impedance |
'S_WZH' | Weak X, 1 and High Impedance |
'S_W0H' | Weak X, 1 and Forcing 0 |
'S_WL1' | Weak X, 0 and Forcing 1 |
'S_X01' |
S_X01 Forcing X, 0 and 1 |
---|---|
'S_X0H' |
S_X0H Forcing X, 0 and Weak 1 |
'S_XL1' |
S_XL1 Forcing X, 1 and Weak 0 |
'S_X0Z' |
S_X0Z Forcing X, 0 and High Impedance |
'S_XZ1' |
S_XZ1 Forcing X, 1 and High Impedance |
'S_WLH' |
S_WLH Weak X, 0 and 1 |
'S_WLZ' |
S_WLZ Weak X, 0 and High Impedance |
'S_WZH' |
S_WZH Weak X, 1 and High Impedance |
'S_W0H' |
S_W0H Weak X, 1 and Forcing 0 |
'S_WL1' |
S_WL1 Weak X, 0 and Forcing 1 |
Modelica.Electrical.Digital.Registers Edge triggered register bank with reset |
|
Modelica.Electrical.Digital.Registers Edge triggered register bank with high active reset |
|
Modelica.Electrical.Digital.Registers Edge triggered register bank with set and reset |
|
Modelica.Electrical.Digital.Registers Edge triggered register bank with high active set and reset |
|
Modelica.Electrical.Digital.Registers Level sensitive register bank with reset |
|
Modelica.Electrical.Digital.Registers Level sensitive register bank with reset active high |
|
Modelica.Electrical.Digital.Registers Level sensitive register bank with set and reset |
|
Modelica.Electrical.Digital.Registers Level sensitive register bank with set and reset, active high |
|
Modelica.Electrical.Digital.Tristates Tristate buffer with enable active high |
|
Modelica.Electrical.Digital.Tristates Tristate buffer with enable active low |
|
Modelica.Electrical.Digital.Tristates Tristate Inverter with enable active high |
|
Modelica.Electrical.Digital.Tristates Tristate inverter with enable active low |
|
Modelica.Electrical.Digital.Multiplexers A two inputs MULTIPLEXER for multiple value logic (2 data inputs, 1 select input, 1 output) |