AxisType2Axis model of the r3 joints 4,5,6 |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The axis model consists of the controller, the motor including current controller and the gearbox including gear elasticity and bearing friction. The only difference to the axis model of joints 4,5,6 (= model axisType2) is that elasticity and damping in the gear boxes are not neglected.
The input signals of this component are the desired angle and desired angular velocity of the joint. The reference signals have to be "smooth" (position has to be differentiable at least 2 times). Otherwise, the gear elasticity leads to significant oscillations.
Default values of the parameters are given for the axis of joint 1.
kp |
Value: 10 Type: Real Description: Gain of position controller |
---|---|
ks |
Value: 1 Type: Real Description: Gain of speed controller |
Ts |
Value: 0.01 Type: Time (s) Description: Time constant of integrator of speed controller |
k |
Value: 1.1616 Type: Real Description: Gain of motor |
w |
Value: 4590 Type: Real Description: Time constant of motor |
D |
Value: 0.6 Type: Real Description: Damping constant of motor |
J |
Value: 0.0013 Type: Inertia (kg·m²) Description: Moment of inertia of motor |
ratio |
Value: -105 Type: Real Description: Gear ratio |
Rv0 |
Value: 0.4 Type: Torque (N·m) Description: Viscous friction torque at zero velocity |
Rv1 |
Value: 0.13 / 160 Type: Real (N·m·s/rad) Description: Viscous friction coefficient |
peak |
Value: 1 Type: Real Description: Maximum static friction torque is peak*Rv0 (peak >= 1) |
flange |
Type: Flange_b |
|
---|---|---|
axisControlBus |
Type: AxisControlBus |
gear |
Type: GearType2 |
|
---|---|---|
motor |
Type: Motor |
|
controller |
Type: Controller |
|
angleSensor |
Type: AngleSensor |
|
speedSensor |
Type: SpeedSensor |
|
accSensor |
Type: AccSensor |
|
initializeFlange |
Type: InitializeFlange |
|
const |
Type: Constant |
Modelica.Mechanics.MultiBody.Examples.Systems.RobotR3 Six degree of freedom robot with path planning, controllers, motors, brakes, gears and mechanics |
Modelica.Mechanics.MultiBody.Examples.Systems.RobotR3.Utilities Axis model of the r3 joints 1,2,3 |