IdealGearR2T

Gearbox transforming rotational into translational motion

Diagram

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is an ideal mass- and inertialess gearbox which transforms a 1D-rotational into a 1D-translational motion. If elasticity, damping or backlash has to be considered, this ideal gearbox has to be connected with corresponding elements. This component defines the kinematic constraint:

(flangeR.phi - internalSupportR.phi) = ratio*(flangeT.s - internalSupportT.s);

Parameters (3)

useSupportR

Value: false

Type: Boolean

Description: = true, if rotational support flange enabled, otherwise implicitly grounded

useSupportT

Value: false

Type: Boolean

Description: = true, if translational support flange enabled, otherwise implicitly grounded

ratio

Value:

Type: Real (rad/m)

Description: Transmission ratio (flange_a.phi/flange_b.s)

Connectors (4)

flangeR

Type: Flange_a

Description: Flange of rotational shaft

flangeT

Type: Flange_b

Description: Flange of translational rod

supportR

Type: Support

Description: Rotational support/housing of component

supportT

Type: Support

Description: Translational support/housing of component

Components (4)

internalSupportR

Type: InternalSupport

internalSupportT

Type: InternalSupport

fixedR

Type: Fixed

fixedT

Type: Fixed

Extended by (1)

IdealGearR2T

Modelica.Mechanics.Translational.Components

Gearbox transforming rotational into translational motion