Fixed

Fixed flange

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

The flange of a 1D translational mechanical system fixed at an position s0 in the housing. May be used:

to connect a compliant element, such as a spring or a damper, between a sliding mass and the housing.
to fix a rigid element, such as a sliding mass, at a specific position.

Parameters (1)

s0	Value: 0 Type: Position (m) Description: Fixed offset position of housing

Connectors (1)

	flange	Type: Flange_b

Used in Examples (12)

	ForceCurrentBehaviour Modelica.Magnetic.FluxTubes.Examples.MovingCoilActuator Comparison of the force-current characteristics of both converter models with armature blocked at mid-position
	SignConvention Modelica.Mechanics.Translational.Examples Examples for the used sign conventions
	InitialConditions Modelica.Mechanics.Translational.Examples Setting of initial conditions
	WhyArrows Modelica.Mechanics.Translational.Examples Use of arrows in Mechanics.Translational
	Damper Modelica.Mechanics.Translational.Examples Use of damper models
	Oscillator Modelica.Mechanics.Translational.Examples Oscillator demonstrates the use of initial conditions
	Friction Modelica.Mechanics.Translational.Examples Use of model Stop
	PreLoad Modelica.Mechanics.Translational.Examples Preload of a spool using ElastoGap models
	ElastoGap Modelica.Mechanics.Translational.Examples Demonstrate usage of ElastoGap
	Brake Modelica.Mechanics.Translational.Examples Demonstrate braking of a translational moving mass
	HeatLosses Modelica.Mechanics.Translational.Examples Demonstrate the modeling of heat losses
	TestCylinder Modelica.Thermal.FluidHeatFlow.Examples Two cylinder system

Used in Components (6)

	TranslationalEMF Modelica.Electrical.Analog.Basic Electromotoric force (electric/mechanic transformer)
	TranslatoryArmatureAndStopper Modelica.Magnetic.FluxTubes.Examples.Utilities Mass with free travel between two stoppers
	Prismatic Modelica.Mechanics.MultiBody.Joints Prismatic joint (1 translational degree-of-freedom, 2 potential states, optional axis flange)
	PartialElementaryRotationalToTranslational Modelica.Mechanics.Rotational.Interfaces Partial model to transform rotational into translational motion
	PartialOneFlangeAndSupport Modelica.Mechanics.Translational.Interfaces Partial model for a component with one translational 1-dim. shaft flange and a support used for graphical modeling, i.e., the model is build up by drag-and-drop from elementary components
	PartialTwoFlangesAndSupport Modelica.Mechanics.Translational.Interfaces Partial model for a component with two translational 1-dim. shaft flanges and a support used for graphical modeling, i.e., the model is build up by drag-and-drop from elementary components