OneMassCooling of one hot mass |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
7th test example: OneMass
A thermal capacity is coupled with a coolant flow. Different initial temperatures of thermal capacity and pipe's coolant get ambient's temperature, the time behaviour depending on coolant flow.Parameters (3)
| medium |
Value: FluidHeatFlow.Media.Medium() Type: Medium Description: Cooling medium |
|---|---|
| TAmb |
Value: 293.15 Type: Temperature (K) Description: Ambient temperature |
| TMass |
Value: 313.15 Type: Temperature (K) Description: Initial temperature of mass |
Outputs (3)
| dTMass |
Default Value: heatCapacitor.port.T - TAmb Type: TemperatureDifference (K) Description: Mass over Ambient |
|---|---|
| dTtoPipe |
Default Value: heatCapacitor.port.T - pipe.T_q Type: TemperatureDifference (K) Description: Mass over Coolant |
| dTCoolant |
Default Value: pipe.dT Type: TemperatureDifference (K) Description: Coolant's temperature increase |
Components (8)
 |
medium |
Type: Medium Description: Cooling medium |
|---|---|---|
 |
ambient1 |
Type: Ambient |
 |
pump |
Type: VolumeFlow |
 |
pipe |
Type: Pipe |
|
ambient2 |
Type: Ambient |
 |
heatCapacitor |
Type: HeatCapacitor |
 |
thermalConductor |
Type: ThermalConductor |
 |
volumeFlow |
Type: DoubleRamp |