DoubleRampRamp going up and down |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Block generating the sum of two ramps.Parameters (7)
| offset |
Value: 1 Type: Real Description: Offset of ramps |
|---|---|
| startTime |
Value: 0.2 Type: Time (s) Description: StartTime of 1st ramp |
| interval |
Value: 0.2 Type: Time (s) Description: Interval between end of 1st and beginning of 2nd ramp |
| height_1 |
Value: -1 Type: Real Description: Height of ramp |
| duration_1 |
Value: 0.2 Type: Time (s) Description: Duration of ramp |
| height_2 |
Value: 1 Type: Real Description: Height of ramp |
| duration_2 |
Value: 0.2 Type: Time (s) Description: Duration of ramp |
Connectors (1)
 |
y |
Type: RealOutput Description: Connector of Real output signal |
|---|
Components (3)
Used in Examples (4)
 |
Modelica.Thermal.FluidHeatFlow.Examples Cooling circuit with drop out of pump |
 |
Modelica.Thermal.FluidHeatFlow.Examples Cooling circuit with parallel branches and drop out of pump |
 |
Modelica.Thermal.FluidHeatFlow.Examples Cooling of one hot mass |
 |
Modelica.Thermal.FluidHeatFlow.Examples Cooling of two hot masses |