PumpDropOutCooling circuit with drop out of pump |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
5th test example: PumpDropOut
Same as 1st test example, but with a drop out of the pump:The pump is running for 0.2 s, then shut down (using a ramp of 0.2 s) for 0.2 s, then started again (using a ramp of 0.2 s).
Parameters (2)
| medium |
Value: FluidHeatFlow.Media.Medium() Type: Medium Description: Cooling medium |
|---|---|
| TAmb |
Value: 293.15 Type: Temperature (K) Description: Ambient temperature |
Outputs (3)
| dTSource |
Default Value: prescribedHeatFlow.port.T - TAmb Type: TemperatureDifference (K) Description: Source over Ambient |
|---|---|
| dTtoPipe |
Default Value: prescribedHeatFlow.port.T - pipe.T_q Type: TemperatureDifference (K) Description: Source over Coolant |
| dTCoolant |
Default Value: pipe.dT Type: TemperatureDifference (K) Description: Coolant's temperature increase |
Components (11)
 |
medium |
Type: Medium Description: Cooling medium |
|---|---|---|
 |
ambient1 |
Type: Ambient |
 |
pump |
Type: VolumeFlow |
 |
pipe |
Type: Pipe |
|
ambient2 |
Type: Ambient |
 |
heatCapacitor |
Type: HeatCapacitor |
 |
prescribedHeatFlow |
Type: PrescribedHeatFlow |
 |
volumeFlow |
Type: DoubleRamp |
 |
heatFlow |
Type: Constant |
 |
convection |
Type: Convection |
|
thermalConductance |
Type: Constant |