ParallelPumpDropOutCooling circuit with parallel branches and drop out of pump |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
6th test example: ParallelPumpDropOut
Same as 2nd test example, but with a drop out of the pump:The pump is running for 0.2 s, then shut down (using a ramp of 0.2 s) for 0.2 s, then started again (using a ramp of 0.2 s).
Parameters (2)
| medium |
Value: FluidHeatFlow.Media.Medium() Type: Medium Description: Cooling medium |
|---|---|
| TAmb |
Value: 293.15 Type: Temperature (K) Description: Ambient temperature |
Outputs (7)
| dTSource1 |
Default Value: prescribedHeatFlow1.port.T - TAmb Type: TemperatureDifference (K) Description: Source1 over Ambient |
|---|---|
| dTtoPipe1 |
Default Value: prescribedHeatFlow1.port.T - pipe1.T_q Type: TemperatureDifference (K) Description: Source1 over Coolant1 |
| dTCoolant1 |
Default Value: pipe1.dT Type: TemperatureDifference (K) Description: Coolant1's temperature increase |
| dTSource2 |
Default Value: prescribedHeatFlow2.port.T - TAmb Type: TemperatureDifference (K) Description: Source2 over Ambient |
| dTtoPipe2 |
Default Value: prescribedHeatFlow2.port.T - pipe2.T_q Type: TemperatureDifference (K) Description: Source2 over Coolant2 |
| dTCoolant2 |
Default Value: pipe2.dT Type: TemperatureDifference (K) Description: Coolant2's temperature increase |
| dTmixedCoolant |
Default Value: ambient2.T_port - ambient1.T_port Type: TemperatureDifference (K) Description: Mixed Coolant's temperature increase |
Components (18)
 |
medium |
Type: Medium Description: Cooling medium |
|---|---|---|
 |
ambient1 |
Type: Ambient |
 |
pump |
Type: VolumeFlow |
 |
pipe1 |
Type: Pipe |
|
pipe2 |
Type: Pipe |
|
pipe3 |
Type: Pipe |
|
ambient2 |
Type: Ambient |
 |
heatCapacitor1 |
Type: HeatCapacitor |
 |
prescribedHeatFlow1 |
Type: PrescribedHeatFlow |
 |
Convection1 |
Type: Convection |
|
heatCapacitor2 |
Type: HeatCapacitor |
|
prescribedHeatFlow2 |
Type: PrescribedHeatFlow |
|
convection2 |
Type: Convection |
 |
volumeFlow |
Type: DoubleRamp |
 |
heatFlow1 |
Type: Constant |
|
heatFlow2 |
Type: Constant |
|
thermalConductance1 |
Type: Constant |
|
thermalConductance2 |
Type: Constant |