PumpAndValveCooling circuit with pump and valve |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
4th test example: PumpAndValve
The pump is running with half speed for 0.4 s, afterwards with full speed (using a ramp of 0.1 s).The valve is half open for 0.9 s, afterwards full open (using a ramp of 0.1 s).
You may try to:
- drive the pump with variable speed and let the valve full open to regulate the volume flow rate of coolant
- drive the pump with constant speed and throttle the valve to regulate the volume flow rate of coolant
Parameters (2)
| medium |
Value: FluidHeatFlow.Media.Medium() Type: Medium Description: Cooling medium |
|---|---|
| TAmb |
Value: 293.15 Type: Temperature (K) Description: Ambient temperature |
Outputs (3)
| dTSource |
Default Value: prescribedHeatFlow.port.T - TAmb Type: TemperatureDifference (K) Description: Source over Ambient |
|---|---|
| dTtoPipe |
Default Value: prescribedHeatFlow.port.T - pipe.T_q Type: TemperatureDifference (K) Description: Source over Coolant |
| dTCoolant |
Default Value: pipe.dT Type: TemperatureDifference (K) Description: Coolant's temperature increase |
Components (14)
 |
medium |
Type: Medium Description: Cooling medium |
|---|---|---|
 |
ambient1 |
Type: Ambient |
 |
idealPump |
Type: IdealPump |
 |
valve |
Type: Valve |
 |
pipe |
Type: Pipe |
|
ambient2 |
Type: Ambient |
 |
heatCapacitor |
Type: HeatCapacitor |
 |
prescribedHeatFlow |
Type: PrescribedHeatFlow |
 |
heatFlow |
Type: Constant |
 |
convection |
Type: Convection |
|
thermalConductance |
Type: Constant |
 |
speed |
Type: Speed |
 |
speedRamp |
Type: Ramp |
|
valveRamp |
Type: Ramp |