Parameters (7)

useConstantFiringAngle	Value: true Type: Boolean Description: Use constant firing angle instead of signal input
constantFiringAngle	Value: 0 Type: Angle (rad) Description: Firing angle
useFilter	Value: true Type: Boolean Description: Enable use of filter
f	Value: 50 Type: Frequency (Hz) Description: Frequency
fCut	Value: 2 * f Type: Frequency (Hz) Description: Cut off frequency of filter
vStart	Value: zeros(m) Type: Voltage[m] (V) Description: Start voltage of filter output
firingAngleMax	Value: Modelica.Constants.pi Type: Angle (rad) Description: Maximum firing angle

Connectors (4)

	firingAngle	Type: RealInput Description: Firing angle (rad)
	fire_p	Type: BooleanOutput[m]
	fire_n	Type: BooleanOutput[m]
	v	Type: RealInput[m] Description: Voltages

	constantconstantFiringAngle	Type: Constant
	positiveThreshold	Type: GreaterThreshold[m]
	negativeThreshold	Type: LessThreshold[m]
	timerPositive	Type: Timer[m]
	timerNegative	Type: Timer[m]
	greaterPositive	Type: Greater[m]
	negativeEqual	Type: Greater[m]
	gain	Type: Gain
	replicator	Type: Replicator
	limiter	Type: Limiter
	filter	Type: Filter[m]
	realPassThrough	Type: RealPassThrough[m] Description: Pass through in case filter is off